RigExpert Stick-Pro 100 kHz – 600 MHz Analyzer | State-of-the-Art Antenna & Cable Analyzer
The Stick-Pro analyzer is designed for measuring SWR (standing wave ratio), return loss, as well as other parameters of cable and antenna systems in the range of 100 kHz to 600 MHz*.
The following tasks are easily accomplished by using this analyzer:
- Rapid check-out of an antenna in the field or stationary conditions.
- Tuning an antenna to resonance.
- Comparing characteristics of an antenna before and after a specific event (rain, hurricane, etc.).
- Measuring capacitance or inductance of reactive loads.
RIGEXPERT STICK PRO
Frequency range: 0.1 ~ 600 MHz
Frequency input step: 1 kHz
Measurements for 25, 50, 75, 100, 150, 200, 300, 450 and 600Ω systems
SWR measurement range: from 1 to 100 in digital mode, from 1 to 10 in graph modes
Range R and X: 0… 2000, -2000… 2000
Operating modes: SWR, Return loss, R, X, Z, L, C, magnitude and phase angle at one frequency. SWR chart, 100 points. Multé mode – for quick testing of a multi-band antenna.
RF output: Connector type: N-type. Output signal shape: pies, from 0.1 to 600 MHz. Output power: -10 dBm (at a load of 50 Ohms).
Power: One lithium-ion battery 3.7 V type 18650. When the analyzer is connected to a PC or DC adapter with a USB connector, it receives power from these sources
Interface: 200 × 200 TFT display. 2 × 3 keys on the waterproof keyboard. English menu and help screens. USB connection to a personal computer
Bluetooth: v.4.2 BLE Single Mode, Class B
Dimensions: 185 mm x 40 mm x 33 mm (7.3 inches x 1.6 inches x 1.3 inches)
Operating temperature: 0 … 40 ° C (32 … 104 ° F)
Weight: 185 g (6.5 ounces) with battery
Warranty: 2 years
RigExpert Stick Pro is made in Ukraine.
* All specifications are subject to change without notice or obligation.
You might also like