Sale!

View larger

AA-230 Zoom Bluetooth

Model

Condition New

RIGEXPERT AA-230 ZOOM Bluetooth – HF/VHF ANTENNA ANALYZER (0.1 TO 230 MHZ)

More details

Send to a friend

Send to a friend

AA-230 Zoom Bluetooth

RIGEXPERT AA-230 ZOOM Bluetooth – HF/VHF ANTENNA ANALYZER (0.1 TO 230 MHZ)

Recipient :

Name of your friend ^* :

E-mail address of your friend ^* :

^* Required fields

or Cancel
Print

$399.95

Quantity

Optional Smith Chart Bench Service

Add to wishlist

More info

DESCRIPTION

The AA-230 Zoom analyzer is designed for measuring SWR (Standing Wave Ratio), Return Loss, Cable Loss, of cable and antenna systems from 100 kHz to 230 MHz.

A built-in ZOOM capability makes graphical measurements especially effective.

An integrated Time Domain Reflectometer mode can be used to locate the precise location of a fault within the feedline system.

The following tasks are easily accomplished by using this analyzer:

Rapid check-out of an antenna

Tuning an antenna to resonance

Comparing characteristics of an antenna before and after specific event (rain, hurricane, etc.)

Making coaxial stubs or measuring their parameters

Cable fault location

Measuring capacitance or inductance of reactive loads

SPECIFICATIONS

Frequency range: 0.1 to 230 MHz

Frequency entry: 1 kHz resolutionMeasurement for 25, 50, 75 and 100-Ohm systems

SWR measurement range: 1 to 100 in numerical mode,
1 to 10 in graph mode

SWR display: numerical or easily-readable bar

R and X range: 0…10000, -10000…10000 in numerical mode,
0…1000, -1000…1000 in graph mode

Display modes:

–    SWR at single or multiple frequencies
–    SWR, return loss, R, X, Z, L, C at single frequency
–    SWR graph, 100 to 500 points
–    R, X graph, 100 to 500 points
–    Smith (or polar) chart, 100 to 500 points
–    Return loss chart, 100 to 500 points
–    TDR (Time Domain Reflectometer) graph

Optional open-short-load calibration.

RF output:

–    Connector type: N
–    Output signal shape: square, 0.1 to 230 MHz.
–    Output power: -10 dBm (at 50 Ohm load)

Power:

–    Four 1.5V alkaline batteries, type AAA *
–    Four 1.2V Ni-MH batteries, type AAA *
–    Max. 4 hours of continuous measurement, max. 2 days in stand-by mode when fully charged batteries are used
–    When the analyzer is connected to a PC or a DC adapter with USB socket, it takes power from these sources

- Bluetooth connection to mobile devices

Interface:

–    290×220 color TFT displaty
–    6×3 keys on the water-proof keypad
–    Multilingual menus and help screens
–    USB connection to a personal computer

- Bluetooth Connection to mobile device

Dimensions: 19·8·3 cm

Operating temperature: 0…40 °C (32…104 °F)

Weight: 400g

Warranty: 2 years (RigExpertCare Provided under RigExpert USA & PNC Engineering’s service guaranty)

RigExpert AA-230 ZOOM is made in Ukraine.

Specifications are subject to change without notice.

* Batteries are not included with the analyzer.